澳门棋牌游戏大全

National Sales Hotline:

****** 576-87355021
Home - Technical Articles -Teach you how to "diagnose" CNC ramp lathes

Teach you how to "diagnose" CNC ramp lathes

Update Time: 2019-12-11 Hits: 29
Teach you how to "diagnose" CNC ramp lathes
When purchasing inclined rail CNC lathes , the same machine body can be equipped with multiple CNC systems. An open CNC system with NC embedded PC structure or SOFT structure should be selected as much as possible. The CNC software of this system is all installed in the computer, and the hardware part is only the standardized universal interface between the computer and the servo drive and external 1 / O. Just as various brands of sound cards, graphics cards, and corresponding drivers can be installed on a computer, users can use the open CNC kernel on the WINDOWSNT platform to develop the required functions to form various types of numerical control systems. In addition to the basic functions in the CNC system, there are many selection functions. Users can choose additional functions according to their own workpiece processing requirements, measurement requirements, programming requirements, etc. to be included in the order contract attachment, especially the real-time transmission DNC function .
Inclined rail CNC lathes are used in various production industries and are a good helper for product production. So what if the good helper is "ill"? How to "diagnose"? The manufacturer of ramp CNC lathes teaches you how to "diagnose".
1.Online diagnosis
On-line diagnosis refers to the automatic control of the numerical control device, PLC controller, servo system, PLC input / output, and other external devices connected to the numerical control device through the control program of the numerical control system in the normal running state in real time. , Check, and display status and fault information. In addition to displaying the alarm number and alarm content on the screen, the system also displays the status of the NC internal flag register and the PLC operating unit in real time, which provides great convenience for fault diagnosis.
2.Offline diagnosis
When the CNC system of a slant rail CNC lathe fails or it is necessary to determine whether there is a failure, it is often necessary to stop processing and stop the inspection, which is offline diagnosis. The purpose of offline diagnosis is to repair the system and locate faults. Strive to locate the fault as small as possible, such as narrowing it down to a certain area or a certain module.
The numerical control device in the dry period uses diagnostic paper tape to diagnose the numerical control system offline. The diagnostic paper tape provides the data required for diagnosis. During diagnosis, the content of the diagnostic tape is read into the RAM in the numerical control device, and the microprocessor in the system analyzes according to the corresponding output data to determine whether the system is faulty and determine the location of the fault. Recent slant-rail CNC lathes are tested with engineer panels, modified CNC systems, or special test equipment.
What must be mastered, otherwise some test data may be wrong.
Yuhuan Haoyide CNC Machine Tool Co., Ltd. (hkmgls.com) Zhejiang ICP No. 17036634-1 GoogleSiteMap Technical Support: Machine Tool Business Network Management Login
Contact address: Yuhuan County Telephone: 13566440203 Contact person: Mr. Shen
online service
真人赌场app下载 大三巴赌博游戏官网 为您推荐2020澳门十大娱乐网址大全 线上电玩信誉网址 金沙官方赌场高品质平台 澳门乐游棋牌 网上真人赌博的软件下载 pt电子游戏官网 网上在线棋牌 澳门手机娱乐平台网址